Follow Me on Pinterest

Followers

Click to view my photography blog

Click to view my photography blog
Cliccare per vedere il mio blog di fotografia

IMPORTANT ---- DOWNLOADS

To download my FREE printables from 4 Shared you must either have a 4Shared account or register on the site (this is free) . This is the only way you can download my freebies saved in 4 Shared.


Per scaricare GRATIS i miei progetti salvati su 4Shared dovete avere un account con 4 Shared o registrare sul sito,( questo si fa gratis) . Questo è l'unico modo per scaricare i miei Freebies.

Tuesday 8 November 2011

" JOY " Cube Christmas Ornament


Hello friends!
Here I am getting ready for Christmas, and you?
As most of you know I have always shared some printable or craft  for Christmas on my blog and lately I have been wracking my brain to come up with something nice to share with you now that the Holiday Season is getting close and this is what I came up with.
A" Joy "cube ornament.
It is very simple to make, all you need is:
white printing paper,
a pair of scissors,
glue and brush,
glitter, ( you can use glitter glue if you prefer)
wide eyed needle,
12 inches of narrow red ribbon, half a centimeter wide
4 red wooden  beads( with holes) .... this is an optional choice.

In the following step by step pictures below you can see how I made the ornament.

Ciao Amiche!
Ecco che ho iniziato a pensare al Natale, e voi?
Come molti di voi sanno, per Natale ho sempre condiviso qualche mia creazione sul blog e ultimamente mi sono cervellata  per creare qualcosa di carino da condividere con voi, visto che il Natale si avvicina . Ecco cosa ho creato. 
Un addobbo a cubo con scritta  JOY  (Gioia)
E 'molto semplice da fare, tutto ciò che vi serve è: 
della carta bianca per stampante
un paio di forbici, 
colla e pennello, 
glitter, (si può usare colla glitter se preferite) 
un ago per lana, 
30 cm  di  nastro rosso largo mezzo centimetro.
4 palline forate ( rosse) di legno ....  siete liberi a scegliere se usare le palline o no.

Nelle foto qui sotto potete vedere passo per passo come ho fatto l'addobbo.


Method:
You must first print and cut out the templates ( to download the free template click here).
With a needle, punch a hole in  the red dot on the blank sides of the cubes .
Fold the cubes in shape and glue the tabs in place.
Next spread some glue on the edges of the cube (Pics. 2 and 3), and dip the edges in the glitter (Pic. 4)
Do the same for all the sides of all 3 cubes.
Leave to dry.
Thread the wide eyed needle with the ribbon and with gentle pressure pass the ribbon through the previously punched hole in the "Y"  cube first, working  from the bottom towards the top...  follow with the "O" cube and finish with the "J" cube.
Take care not to put too much pressure on the paper cubes or you will ruin the shape, remember they are made of paper.  Finish off  with knotting a small loop at the top of the "J" cube. Arrange the distance between the cubes to your liking.
If you choose to have the cubes seperated by the wooden balls than all you have to do is thread the red ribbon through the beads before threading through the cube... in this case you must start with a wooden bead and then  proceed with the cubes.
Simple and easy ! I hope you like my little ornament.

Metodo:
È necessario prima stampare e ritagliare i cubi (per scaricare i modelli gratis cliccate qui).
Con un agofate un buco nel punto rosso sui lati dei cubi ( lato senza lettera). 
Piegare e formare i cubi e incollate le linguette in posizione. 
Adesso spalmate un po 'di colla sui bordi del cubo (Fig. 2 e 3) e immergere i bordi nel glitter (Fig. 4) 
Fare lo stesso per tutti i lati di tutte e 3  i cubi. 
Lasciate asciugare. 
Infilate l'ago con il nastro e con una leggera pressione passate il nastro attraverso il foro precedentemente perforato nel cubo "Y "prima, lavorando dal basso verso l'alto ... seguite con il cubo "O" e finite con il cubo "J". 
Fate attenzione a non mettere troppa pressione sui cubi  di carta o si rovinerà la forma, ricordate che sono fatti di carta. In fine annodate un piccolo anello alla sommità del cubo "J".  
Disporre la distanza tra i cubi a proprio piacimento. 
Se volete usare le palline per separare i cubi allora dovete iniziare con una pallina e poi procedere con i cubi, alternando cubo e pallina.
Semplice e facile! Spero che il mio piccolo addobbo vi piaccia.
The cubes before threading.
I cube prima di essere attaccati al nastro.


This is a resized image of the template.   Questa è un'immagine ridotta del modello.



5 comments:

vanda said...

bella idea Sue originale e l'hai fatto anche molto bene,grazie !!!
Vanda

Cinzia said...

Grazie Sue, hai sempre delle bellissime idee!
Cinzia

Loree said...

It looks very very pretty.

Doreen said...

Great idea, very nice work sis and thanks for the tutorial : )
Hugs,
Doreen

Joy said...

Thank you for the tutorial. That is a real cute idea. Yours is very pretty!

LinkWithin

Related Posts with Thumbnails